A silver assist for microbial fuel cell power.

Silver nanoparticles in Shewanella membranes boost electron transfer to graphene electrodes.

The Use of Electroactive Halophilic Bacteria for Improvements and Advancements in Environmental High Saline Biosensing.

Halophilic bacteria are remarkable organisms that have evolved strategies to survive in high saline concentrations. These bacteria offer many advances for microbial-based biotechnologies and are commonly used for industrial processes such as compatible solute synthesis, biofuel production, and other microbial processes that occur in high saline environments. Using halophilic bacteria in electrochemical systems offers enhanced stability and applications in extreme environments where common electroactive microorganisms would not survive. Incorporating halophilic bacteria into microbial fuel cells has become of particular interest for renewable energy generation and self-powered biosensing since many wastewaters can contain fluctuating and high saline concentrations. In this perspective, we highlight the evolutionary mechanisms of halophilic microorganisms, review their application in microbial electrochemical sensing, and offer future perspectives and directions in using halophilic electroactive microorganisms for high saline biosensing.

Advances in Electrochemical Modification Strategies of 5-Hydroxymethylfurfural.

The development of electrochemical catalytic conversion of 5-hydroxymethylfurfural (HMF) has recently gained attention as a potentially scalable approach for both oxidation and reduction processes yielding value-added products. While the possibility of electrocatalytic HMF transformations has been demonstrated, this growing research area is in its initial stages. Additionally, its practical applications remain limited due to low catalytic activity and product selectivity. Understanding the catalytic processes and design of electrocatalysts are important in achieving a selective and complete conversion into the desired highly valuable products. In this Minireview, an overview of the most recent status, advances, and challenges of oxidation and reduction processes of HMF was provided. Discussion and summary of voltammetric studies and important reaction factors (e. g., catalyst type, electrode material) were included. Finally, biocatalysts (e. g., enzymes, whole cells) were introduced for HMF modification, and future opportunities to combine biocatalysts with electrochemical methods for the production of high-value chemicals from HMF were discussed.

Draft Genome Sequence of Salinivibrio sp. Strain EAGSL, a Biotechnologically Relevant Halophilic Microorganism.

The halophilic bacterium Salinivibrio sp. strain EAGSL was isolated from the Great Salt Lake (Utah) for use in microbial electrochemical technologies experiencing fluctuating salt concentrations. Genome sequencing was performed with Ion Torrent technology, and the assembled genome reported here is 3,234,770 bp with a GC content of 49.41%.

Fundamentals, Applications, and Future Directions of Bioelectrocatalysis.

Bioelectrocatalysis is an interdisciplinary research field combining biocatalysis and electrocatalysis via the utilization of materials derived from biological systems as catalysts to catalyze the redox reactions occurring at an electrode. Bioelectrocatalysis synergistically couples the merits of both biocatalysis and electrocatalysis. The advantages of biocatalysis include high activity, high selectivity, wide substrate scope, and mild reaction conditions. The advantages of electrocatalysis include the possible utilization of renewable electricity as an electron source and high energy conversion efficiency. These properties are integrated to achieve selective biosensing, efficient energy conversion, and the production of diverse products. This review seeks to systematically and comprehensively detail the fundamentals, analyze the existing problems, summarize the development status and applications, and look toward the future development directions of bioelectrocatalysis. First, the structure, function, and modification of bioelectrocatalysts are discussed. Second, the essentials of bioelectrocatalytic systems, including electron transfer mechanisms, electrode materials, and reaction medium, are described. Third, the application of bioelectrocatalysis in the fields of biosensors, fuel cells, solar cells, catalytic mechanism studies, and bioelectrosyntheses of high-value chemicals are systematically summarized. Finally, future developments and a perspective on bioelectrocatalysis are suggested.

Advancing the fundamental understanding and practical applications of photo-bioelectrocatalysis.

Photo-bioelectrocatalysis combines the natural and highly sophisticated process of photosynthesis in biological entities with an abiotic electrode surface, to perform semi-artificial photosynthesis. However, challenges must be overcome, from the establishment and understanding of the photoexcited electron harvesting process at the electrode to the electrochemical characterization of these biotic/abiotic systems, and their subsequent tuning for enhancing energy generation (chemical and/or electrical). This Feature Article discusses the various approaches utilized to tackle these challenges, particularly focusing on powerful multi-disciplinary approaches for understanding and improving photo-bioelectrocatalysis. Among them is the combination of experimental evidence and quantum mechanical calculations, the use of bioinformatics to understand photo-bioelectrocatalysis at a metabolic level, or bioengineering to improve and facilitate photo-bioelectrocatalysis. Key aspects for the future development of photo-bioelectrocatalysis are presented alongside future research needs and promising applications of semi-artificial photosynthesis.

Unveiling salinity effects on photo-bioelectrocatalysis through combination of bioinformatics and electrochemistry.

Little is known about the adaptation strategies utilized by photosynthetic microorganisms to cope with salinity changes happening in the environment, and the effects on microbial electrochemical technologies. Herein, bioinformatics analysis revealed a metabolism shift in Rhodobacter capsulatus resulting from salt stress, with changes in gene expression allowing accumulation of compatible solutes to balance osmotic pressure, together with the up-regulation of the nitrogen fixation cycle, an electron sink of the photosynthetic electron transfer chain. Using the transcriptome evidence of hindered electron transfer in the photosynthetic electron transport chain induced by adaption to salinity, increased understanding of photo-bioelectrocatalysis under salt stress is achieved. Accumulation of glycine-betaine allows immediate tuning of salinity tolerance but does not provide cell stabilization, with a 40 ± 20% loss of photo-bioelectrocatalysis in a 60 min time scale. Conversely, exposure to or inducing the expression of the Rhodobacter capsulatus gene transfer agent tunes salinity tolerance and increases cell stability. This work provides a proof of concept for the combination of bioinformatics and electrochemical tools to investigate microbial electrochemical systems, opening exciting future research opportunities.

Tuning purple bacteria salt-tolerance for photobioelectrochemical systems in saline environments.

The development of photobioelectrochemical systems is an exciting field requiring a combination of electrochemical, biological and material science knowledge. One of the main advantages of applying anoxygenic photosynthetic microorganisms versus non-photosynthetic bacteria is the possibility to utilize sunlight as the energy source, while removing organic contaminants from a solution. Since bacterial cells utilize energy to maintain the intracellular osmolarity, bacterial species that do not rely on organic species as an energy source have an advantage over species requiring them for their sustainment. Herein, we discuss the possible use of Rhodobacter capsulatus, an extremely versatile photosynthetic purple bacteria, for application in environments within a range of low to moderately high salinity (0-25 g L-1 NaCl). Bacterial cells' capability to adapt to changing salinity, and effects on bioelectrochemical performance will be presented, as well as major drawbacks and research needs to drive future efforts and discussions.

Electrometabolic Pathways: Recent Developments in Bioelectrocatalytic Cascades.

In biological systems, the majority of chemistry occurs in enzymatic pathways. Pathways are essentially cascades of protein catalysts used for catabolism or metabolism. However, in cellular-free systems, catalytic cascades have been rarely studied until recently. This review will introduce the lessons that can be learned from in vivo enzymatic pathways and novel enzymatic pathways that have been developed for synthetic biology of electrochemical energy production and conversion. This review will also discuss the recent bio-inspired developments to utilize catalytic cascades for non-biological applications ranging from energy conversion to biosensing and the electrochemical production of important chemicals such as methanol from carbon dioxide and ammonia from agricultural waste runoff.

Effects of White Noise Achilles Tendon Vibration on Quiet Standing and Active Postural Positioning.

Applying white noise vibration to the ankle tendons has previously been used to improve passive movement detection and alter postural control, likely by enhancing proprioceptive feedback. The aim of the present study was to determine if similar methods focused on the ankle plantarflexors affect the performance of both quiet standing and an active postural positioning task, in which participants may be more reliant on proprioceptive feedback from actively contracting muscles. Twenty young, healthy participants performed quiet standing trials and active postural positioning trials designed to encourage reliance on plantarflexor proprioception. Performance under normal conditions with no vibration was compared to performance with 8 levels of vibration amplitude applied to the bilateral Achilles tendons. Vibration amplitude was set either as a percentage of sensory threshold (n = 10) or by root-mean-square (RMS) amplitude (n = 10). No vibration amplitude had a significant effect on quiet standing. In contrast, accuracy of the active postural positioning task was significantly (P = .001) improved by vibration with an RMS amplitude of 30 µm. Setting vibration amplitude based on sensory threshold did not significantly affect postural positioning accuracy. The present results demonstrate that appropriate amplitude tendon vibration may hold promise for enhancing the use of proprioceptive feedback during functional active movement.